HYC_50 – Operation and Installation Guide
Hardware
Version 1-2
6 Operation of the HYC_50
All rights reserved. Reproduction of this document, in whole or in part, is only permitted with the permission of alpitronic GmbH.
6.1.3. Plugging in the charging cable
After you have selected the type of charging cable, the display will prompt you to plug the
corresponding charging cable into the designated socket on your vehicle.
Information
The corresponding LED strip flashes blue as soon as the charging cable
can be plugged in. As soon as the charging process has started, it stops
flashing and remains solid blue.
Figure 25: Plugging in the charging cable
Information
For CHAdeMO cables, make sure that they lock correctly.
To Next Page
Loading...
Need help?
General
