Alpitronic hypercharge HYC 50 User Manual

HYC_50 – Operation and Installation Guide
Hardware
Version 1-2
8 Maintenance
Page 71 of 76
All rights reserved. Reproduction of this document, in whole or in part, is only permitted with the permission of alpitronic GmbH.
Figure 43: Air filter outlet
8.7. Plug contacts charging cable set
Check that the charging cables are in perfect condition. Make sure that all cable parts
(cable, connector, pins, cable sleeve, locking mechanism) are free of dirt, crushing, cracks,
wear, burns or other damage. Also check that the insulation is intact and that all screws
are tight.
Figure 44: Charging plug side view

Alpitronic hypercharge HYC 50 Specifications

General

Brand	Alpitronic
Model	hypercharge HYC 50
Category	Battery Charger
Language	English