Enova DGX Audio Switching Boards
144
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Enova DGX Audio Switching Boards – Specifications
Applies to Audio Switching Board sets FG1061-716, FG1061-732, and FG1061-764.
NOTE: Only 2 channel L-PCM audio is supported by the Audio Switching Output Board unless downmixing is employed. All other audio
formats will be muted before the output connector.
Enova DGX Audio Switching Board Specifications
Parameter Value
Compatible AMX Systems Enova DGX 100 Series Digital Media Switchers
• Enova DGX 800/1600 (DGX800-ASB/DGX1600-ASB)
• Enova DGX 3200 (DGX3200-ASB)
• Enova DGX 6400 (DGX6400-ASB)
Compatible Enova DGX I/O Boards • DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058-540)
• DGX-I-HDMI-4K, Enova DGX 4K HDMI Input Board (FG1061-540)
• DGX-O-HDMI, Enova DGX HDMI Output Board (FG1058-550)
• DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600)
• DGX-O-DVI, Enova DGX DVI Output Board (FG1058-610)
• DGX-I-DXL, Enova DGX DXLink Twisted Pair Input Board (FG1058-570)
• DGX-O-DXL, Enova DGX DXLink Twisted Pair Output Board (FG1058-580)
• DGX-I-DXL-4K, Enova DGX DXLink Twisted Pair 4K Input Board (FG1061-570)
• DGX-O-DXL-4K, Enova DGX DXLink Twisted Pair 4K Output Board (FG1061-580)
• DGX-I-DXF-MMD, Enova DGX DXLink Multimode Fiber Input Board, Duplex
(FG1058-622)
• DGX-O-DXF-MMD, Enova DGX DXLink Multimode Fiber Output Board, Duplex
(FG1058-632)
• DGX-I-DXF-MMS, Enova DGX DXLink Multimode Fiber Input Board, Simplex
(FG1058-623)
• DGX-O-DXF-MMS, Enova DGX DXLink Multimode Fiber Output Board, Simplex
(FG1058-633)
• DGX-I-DXF-SMD, Enova DGX DXLink Single Mode Fiber Input Board, Duplex
(FG1058-620)
• DGX-O-DXF-SMD, Enova DGX DXLink Single Mode Fiber Output Board, Duplex
(FG1058-630)
• DGX-I-DXF-SMS, Enova DGX DXLink Single Mode Fiber Input Board, Simplex
(FG1058-621)
• DGX-O-DXF-SMS, Enova DGX DXLink Single Mode Fiber Output Board, Simplex
(FG1058-631)
Audio Switching 16x16 for Enova DGX 800, 24x24 for Enova DGX 1600,
40x40 for Enova DGX 3200, 80x80 for Enova DGX 6400
Auxiliary Audio Connections 3.5 mm 10-position captive-wire terminals (4 per board); support balanced
(differential) or unbalanced (single-ended) stereo audio
Embedded Digital Audio • Enova DGX 800: Audio inputs on Enova DGX Input Boards for positions 1-8 and
outputs on Enova DGX Output Boards for positions 1-8.
• Enova DGX 1600: Audio inputs on Enova DGX Input Boards for positions 1-16
and outputs on Enova DGX Output Boards for positions 1-16.
• Enova DGX 3200: Audio inputs on Enova DGX Input Boards for positions 1-32
and outputs on Enova DGX Output Boards for positions 1-32.
• Enova DGX 6400: Audio inputs on Enova DGX Input Boards for positions 1-64
and outputs on Enova DGX Output Boards for positions 1-64.
NOTE: Embedded audio must originate as 2 channel L-PCM unless downmixing
is employed.
Downmix
Downmix Input Downmix input fed from a single selectable embedded audio input from any Enova
DGX Input Board. Downmixed audio switchable to all embedded/auxiliary audio
outputs. +17 dBu
Downmix Input Format Support Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
To Next Page
Loading...
Need help?
General
