Switching, Configuration, and Status
176
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
To set an EDID for an input:
1. From Configuration page / Switch Mode (on the left), click the Video button.
2. Check to be sure the Config Viewer on the top right is set to Inputs Only.
3. From the Switching pane on the left, select the video input.
4. Under General settings from the EDID Mode drop-down list, select the mode (All Resolutions, Wide-Screen, Full-Screen, or
Custom).
5. Select the Preferred EDID from the drop-down list of resolutions/refresh rates.
6. Click the Save EDID button.*
* Once the preferred EDID is saved, it can be loaded to another input(s).
To set an EDID for an output:
1. From Configuration page / Switch Mode (on the left), click the Video button.
2. Check to be sure the Config Viewer on the top right is set to Outputs Only.
3. From the Switching pane on the left, select the video output.
4. Under General settings from the Resolution drop-down list, select the resolution/refresh rate.**
5. Under General settings, click the Save EDID button.
** Click the “Show only EDID Display Supported (DS)” check box to narrow the drop-down list to show only those resolution/
refresh rate options marked DS (Display Supported).
To set the EDID Mode for an audio input:
1. From Configuration page / Switch Mode (on the left), click the Audio button.
2. Check to be sure the Config Viewer on the top right is set to Inputs Only.
3. From the Switching page components on the left, select the audio input.
4. Under General settings from the EDID Mode drop-down list, select the mode: Basic, PCM 2-Channel, PCM Multi-Channel,
Dolby Digital, Dolby Digital + DTS, Dolby Digital + MPEG, Dolby Digital + AAC, Dolby TrueHD, or DTS HD Master.
Load and Save EDIDs
For custom EDIDs, click the Load EDID button and browse for the .edid file on your device/computer. Once the EDID is loaded, make
any necessary changes and use the Save EDID button to save the altered .edid file to your device/computer.
NOTE: Some devices run on a secured file-system. As such, file-system operations (e.g., Load and Save operations) may not be
supported by the device’s default capabilities and may require downloading a file manager application.
Loa
an
Save EDID
To Next Page
Loading...
Need help?
General
