Control Panel Operation
223
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
CAUTION: We strongly recommend keeping track of the number and the system state routing used for each global preset. If a
previously used number is assigned to another system state (using either the Control Panel or BCS commands), the former state will
be automatically overwritten.
The instructions below define an example Global Preset 3, and the instructions at the bottom of the page are used to execute a
predefined Global Preset 3.
IMPORTANT: Wait approximately ten seconds for the system to store the global preset setting before executing another operation.
To define a global preset:
1. Route the system to the desired state.
2. Press the Function Key.
The Function menu appears.
3. Locate Global Preset by scrolling with the Control Dial.
4. Press the Select Key.
The Global Preset submenu appears.
5. Scroll with the Control Dial to Define Global.
Press the Select Key.
The Define Global list appears.
6. Scroll with the Control Dial until Global Preset 3 appears.
7. Press either the Select Key or the Take Key.
8. Wait approximately ten seconds for the system to store the global preset setting.
The current routing state can now be recalled as Global Preset 3, and the system returns to the Global Preset submenu.
9. Press the Function Key to return to the Function menu.
To execute a global preset:
1. Press the Function Key.
The Function menu appears.
2. Locate Global Preset by scrolling with the Control Dial.
3. Press the Select Key.
Execute Global appears.
4. Press the Select Key.
The Execute Global Preset list appears.
To Next Page
Loading...
Need help?
General
