SL200 User Manual
Chapter 3 Router Setup
17
Host Name
: Enter a hostname provided by the ISP (Default:
SL200).
Domain Name
: Enter a Domain Name provided by the ISP.
Set Time Zone:
Select the time zone of the country you are
currently in. The router will set the time based on your selection.
Daylight Saving
: The router can also take Daylight savings into
account. If you wish to use this function, you must check/tick the
enable box to enable your daylight saving conguration.
NAT
: You can select to enable NAT function.
3.3.3 Administrator Settings
Use this menu to restrict management access based on a specic
password. By default, the password is admin. So please assign a
password to the Administrator as soon as possible, and save it in a
safe place.
Passwords can contain from 3-12 alphanumeric characters, and
are case sensitive.
Administrator Time-Out
- The amount of time of inactivity before
the router will automatically close the Administrator session. Set
this to zero to disable it.
Remote Management
- By default, management access is only
available to users on your local network.
However, you can also manage the router from a remote host by
adding the IP address of an administrator to this screen.
To Next Page
Loading...
Need help?
General
