Asus SL200 - 1.5 Installation Instruction

4
Chapter 1 Introduction
SL200 User Manual
1.5 Installation Instruction
1) Power off the router and DSL/cable modem.
2) Connect systems to the LAN ports on the router with straight
LAN cables.
3) Connect the DSL or cable modem to the WAN port on the router.
4) Power on DSL or cable modem rst, then connect power
adapter to the power jack on the router and plug the power
cable into an outlet.
5) Check LEDs.
a) Once power on the router, Power LED should be on.
b) LAN LED should be on for each active LAN connection.
c) The WAN LED should be on when the DSL or cable modem is
connected.