Chapter 2. Hardware Setup
21
Securing the Cables
For added safety, use ATEN Lok-U-Plug cable holders (not for PE6208AVX)
to secure the cables from your attached devices in place on the eco PDU unit.
Secure the cable holders using the specially designed holes around the
individual power outlets, as shown below:
Note: 1. Cable holders are an optional accessory. See Cable Holders, page 5.
2. Use only the ATEN Lok-U-Plug cable holders that have been
specifically designed to work with the eco PDU. Using any other kind
of cable securing device could be highly dangerous.
To Next Page
Loading...
Need help?
General
