• After servicing, reset the service timer. See section Calling up/resetting the service timer
3.8 Scrolling through all screens
Control panel
Control panel
Scroll buttons (12) can be used to scroll through all screens. The screens are divided into register screens,
measured data screens, digital input screens (numbered as <d.in>, <d.1>, ...), parameter screens (numbered
as <P.1>, <P.2>, ...), protections screens (numbered as <Pr.1>,...) and test screens (numbered as <t.1>,...).
During scrolling, the numbers of the screens appear consecutively. For most screens, the unit of measurement
and the related pictograph are shown together with the screen number.
Example
The screen shows the screen number <d.1>, the unit used <hrs> and the related symbol for running hours.
Press Enter key (13) to call up the actual running hours.
Overview of the screens
Digital input
screens
Designation Related topic
<d.in> Digital input status
<d.1> Running hours (hrs or x 1000 hrs) See section Calling-up running hours
<d.2> Motor starts (x 1 or x 1000) See section Calling up motor starts
<d.3> Module hours (hrs or x 1000 hrs) See section Calling up module hours
Instruction book
2920 7109 60 35
To Next Page
Loading...
Need help?
General
