(1) Menu
(2) Regulation
• Move the cursor to the Outputs icon (see above, section Menu icon, using the Scroll keys.
• Press the Enter key. A screen similar to the one below appears:
Outputs screen (typical)
Text on image
(1) Outputs
(2) Fan motor contact
(3) Blow-off contact
(4) General shutdown
(5) Automatic operation
• The screen shows a list of all outputs with their corresponding icons and readings.
If an output is in warning or shutdown, the original icon is replaced by the warning or shutdown icon
respectively.
4.8 Counters
Control panel
Instruction book
84 2920 7109 60
To Next Page
Loading...
Need help?
General
