R5905752 /16 DP2K C126
Image 10–5 Release front cover
4. Remove the front cover from the projector doing the following:
1. standing in front of the projector, pull the upper right corner (A) of the front cover toward you until the
latch releases,
2. pull the lower right corner (B) of the front cover toward you until the latch releases,
3. then move the front cover away from the projector.
Image 10–6 Remove front cover
10.4 Removal of the side cover
Required tools
Flat screw driver.
How to remove the side cover of the projector?
1. Release the captive screw at the middle bottom of the side cover, using a flat screw driver.
Image 10–7
2. Remove the side cover from the projector doing the following:
1. gently pull out the bottom corners (A) of the side cover,
2. then gently pull out the top corners (B) of the side cover,
3. then move the side cover away from the projector (C).
Removal and installation of projector covers
To Next Page
Loading...
Need help?
General
