137R5905752 /16 DP2K C
Image 11–2 Dust filter removal
Clean the dust filter
1. Remove most contamination with a vacuum cleaner in an other room or outside.
2. Blow remaining dust away with compressed air in an other room or outside.
Mount the dust filter
1. Insert the dust filter with the handle to the projector side.
2. Pull the handle a little backward, push the filter completely in. Release the handle so that it jumps in its
lock.
11.2 Clean the dust filter on the bottom side
Remove the dust filter
1. Remove the side cover, see “Removal of the side cover”, page 126.
2. Release the dust filter by pushing the handle a little bit downwards.
Maintenance
To Next Page
Loading...
Need help?
General
