Beckhoff BC3150 User Manual

Parameterization and Commissioning
BC3150 53Version: 2.1.0
4.4 Programming cable
Use the KS2000-Z2 programming cable for serial programming of the Bus Terminal Controller. This cable is
included in the scope of supply of the KS2000 software, or it can be ordered separately (order identifier
KS2000-Z2).
Fig.49: Programming cable KS2000-Z2
KS2000-Z2
The programming cable offers the option of programming the BCxx50 via the serial interface.
Attention
Do not interrupt the ground connection for the supply voltage
When the programming cable (between BCxx50 and PC) is connected, the ground connec-
tion of the Bus Terminal controller must not be interrupted or disconnected, since this may
destroy the programming cable.

Beckhoff BC3150 Specifications

General

Brand	Beckhoff
Model	BC3150
Category	Controller
Language	English