Operation
EL691088 Version: 1.4.1
Fig.119: Creating a link to TwinSAFE SC terminal
The CRC to be used can be selected or a free CRC can be entered under the Connection tab of the alias
device.
Entry Mode Used CRCs
TwinSAFE SC CRC 1 master 0x1571F
TwinSAFE SC CRC 2 master 0x17B0F
TwinSAFE SC CRC 3 master 0x11F95
TwinSAFE SC CRC 4 master 0x153F1
TwinSAFE SC CRC 5 master 0x1F1D5
TwinSAFE SC CRC 6 master 0x1663B
TwinSAFE SC CRC 7 master 0x1B8CD
TwinSAFE SC CRC 8 master 0x1E1BD
Fig.120: Selecting a free CRC
These settings must match the settings in the CoE objects of the TwinSAFE SC component. The TwinSAFE
SC component initially makes all available process data available. The Safety Parameters tab typically
contains no parameters. The process data size and the process data themselves can be selected under the
Process Image tab.
To Next Page
Loading...
Need help?
General
