Handling
4.3 Storage
Requirement Characteristic value
Climate category 2K3 according to EN 60721
Storage temperature -25°C to +85°C
Permissible relative humidity 15% - 95%, no condensation
Store only in the original recyclable manufacturer's packaging.
4.4 Maintenance / Cleaning
Maintenance
The XTS motor modules are maintenance-free!
WARNING
Observe the ambient commissioning conditions!
Make sure that the XTS is stored and electrically operated only under the specified condi-
tions.
The XTS movers are not maintenance-free!
WARNING
Destruction of the rails!
The guide rollers of movers must be checked at regular intervals. Remove any dirt or other
foreign material that may have accumulated on the guide rollers during operation. Failure to
comply with regular maintenance can lead to increased wear of the guide rollers, as well as
damage to the rails.
Note
Rail maintenance
The rails can be lubricated lightly. This increases the life of the guide rollers. The following
lubricants are suitable for this purpose:
• Vaseline according to DAB 10 (German Pharmacopoeia 10)
• Vaseline spray
• Silicone spray
• PTFE spray
• If the rails are cleaned for maintenance, re-lubricate them with one of the lubricants
listed above. For further specifications please contact the Beckhoff applications depart-
ment.
eXtended Transport System Start-Up12
Version: 1.2