27
3.1 Operation of Qsep Series
After launching Q-Analyzer™, the Main Window appears on the screen.
In this window, you can access the Instrument function which is used to communicate
with the device (Figure 3-2). This section will only introduce the Main tab features and
how to operate Qsep™ series (Figure 3-2 A). The other function tabs will be described
later in the Section 4.4.
The software will create a default project named per date automatically. You can also
create another project for experiments with different purposes by clicking
in the Toolbar (Figure 3-2 B).
Figure 3-2 Main window of the mode
To Next Page
Loading...
Need help?
General
