83
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
3 Mark and confirm the menu item that you want to adjust.
✔ The selection menu or the scale for adjusting the setting is displayed.
4 Select the setting using the menu knob :.
5 Press the OK button ; or the ESC button = to accept the setting.
✔ The radio menu appears in the display again.
6 Press the ESC button = twice to close the radio menu.
Setting the day/night display brightness and contrast
You can adjust the display brightness separately for day (when vehicle lights
are off) and night (when vehicle lights are on) to suit your preferences. Further-
more, you can change the contrast of the display.
To adjust the display settings,
1 press the MENU button @.
✔ The setup menu appears in the display.
2 Mark and confirm the DISPLAY menu item.
✔ The display menu appears in the display.
3 Mark and confirm the menu item that you want to adjust.
✔ The scale for adjusting the setting is displayed.
Note: When setting the display brightness (DIMMING), the system
differentiates between whether daytime mode (lights off) or night-
time mode (lights on) is active. The setting changes that you make
only affect the currently active mode.
RDS
RDS NAME
REGIONAL
HICUT
radio
NAV
T
MC
ON
OFF
rdS
NAV
T
MC
DIMMING
CONTRAST
DisplaX
NAV
T
MC
NAVI
DISPLAY
LANGUAGE
CLOCK
SE==INGS
NAV
T
MC
6 BA TPAmsterd_gb 26.09.2005, 12:49 Uhr83
To Next Page
Loading...
Need help?
General
