BMC REACTHEALTH Luna G3 APAP User Manual

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual
16 / 49
12.4 Assembling the Tubing / Heated Tubing and Mask
(1) Connect one end of the tubing to the air outlet of the device, as shown in Fig.
12-4.
Air Outlet
Tubing
Fig. 12-4
(2) Connect the heated tubing joint to the air outlet of the device, and then insert
the power plug of the heated tubing into the heated tubing port on the back of the
device, as shown in Fig. 12-5.
Power Plug
Heated Tubing
Air Outlet
Heated Tubing Port
Heated Tubing Joint
Fig. 12-5
CAUTION!
• As the ambient temperature decreases, the humidifier can be reduced to
improve or avoid condensation in the pipeline. If the ambient temperature is too
low, in order to avoid condensation, it is recommended to use the heated tubing.
If the heated tubing is connected correctly, the icon will become a number in
the Main Interface on the screen of the device, as shown in Fig. 12-6.

BMC REACTHEALTH Luna G3 APAP Specifications

General

Brand	BMC
Model	REACTHEALTH Luna G3 APAP
Category	Respiratory Product
Language	English