The current call is held.
4. Dial a new phone number or select from a
list.
"Resume"
The call that is in progress is resumed.
Switching between two calls,
alternating
Active call is displayed in colour.
Call on hold is displayed in grey.
"Swap calls"
The phone switches to the call that is in pro‐
gress.
Setting up a conference
Two calls can be merged to set up a telephone
conference.
1.
Setting up two calls.
2. "Conference call"
On termination, both calls are always termina‐
ted. If one call is terminated by another sub‐
scriber, the other call is continued, if required.
DTMF overlap dialling
Using DTMF overlap dialling to access network
services or to control devices, e.g. remote an‐
swer phone access. This requires the DTMF
code.
1.
"Telephone"
2. Selecting a contact from a list or "Dial
number".
3. "DTMF suffix dialling"
4. Enter DTMF code via iDrive.
Phone book
Displays
The phone book accesses the contacts and lists
all contacts for which a phone number has been
entered. The entries can be selected and a call
set up.
1. "Telephone"
2. "Phone book"
All contacts with a telephone number are dis‐
played. A symbol indicates the storage location
of the contacts.
Call contact
Symbol Meaning
Contact with a stored telephone
number.
Contact with more than one stored
telephone number.
Call not possible, mobile phone with‐
out reception or network or Teleser‐
vice Call* active.
For contacts with more than one stored tele‐
phone number: select the desired contact. The
connection is established.
For contacts with more than one stored tele‐
phone number: select the desired contact and
then select the phone number. The connection
is established.
Editing contacts
Changing the entries in the "Contacts" menu. If
a contact is changed, the changes are not saved
Seite 193
193
Online Edition for Part no. 01 40 2 607 643 - 07 11 490
Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
To Next Page
Loading...
Need help?
General
