1. Press the button or tilt the controller
repeatedly to the right until the "Options"
menu appears.
2. "Show Owner's Handbook"
Calling up with display of a Check
Control message
Directly from the Check Control message on the
control display:
"Show Owner's Handbook"
Switching between function and
Owner’s Handbook
You can use the control display to switch from a
function, for example radio, to the Owner's
Handbook, and then back and forth between the
two displays:
1.
Press the button or tilt the controller
repeatedly to the right until the "Options"
menu appears.
2. "Show Owner's Handbook"
3. Select the desired page in the Owner’s
Handbook.
4. Press the button again to switch back
to the last displayed function.
5. Press the button again to switch back
to the last displayed page of the Owner’s
Handbook.
To switch continuously between the last dis‐
played function and the last displayed page of
the Owner’s Handbook, repeat steps 4 and 5. As
you do so, new screens are opened.
Favourites buttons
General
The Owner's Handbook can be stored in the fa‐
vourite buttons and called up directly.
Saving
1. Select "Owner's Handbook" using the
iDrive.
2. Hold down the desired button for
longer than two seconds.
Use
Press the button.
The Owner's Handbook is displayed
immediately.
Seite 24
24
Online Edition for Part no. 01 40 2 607 643 - 07 11 490
Integrated Owner’s Handbook in the vehicle
To Next Page
Loading...
Need help?
General
