Route guidance
146
Route guidance
Starting route guidance
Route guidance is started for the topmost des-
tination of the destinations list, see page 140.
At least one destination must be in the destina-
tions list.
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "Navigation".
3. Press the controller if necessary.
4. Select "Route guide" and press the control-
ler.
Route guidance is started. While the navigation
computer is calculating the route to your desti-
nation, depending on the display mode, the dis-
tance and direction to the destination as the
crow flies are displayed at the top right of the
control display.
After the route has been calculated, route guid-
ance appears on the control display, depending
on the display mode selected. The destination
place is displayed in the status line.
During route guidance, you can operate other
equipment items at any time via iDrive. A
required change of direction is drawn to your
attention in good time via spoken instructions.
Via the voice input system:
Ending/continuing route
guidance
Ending route guidance
1. Press the controller if necessary.
2. Select "Route guide" and press the control-
ler.
Route guidance is switched off.
Via the voice input system:
Continuing route guidance
If the destination was not reached before the
end of your last journey or if it was reached and
there is another destination in the destinations
list, the following query will be displayed at the
start of your next journey, when you call up the
navigation system: "Continue destination guid-
ance?".
Route guidance starts automatically after a
short while.
To start route guidance immediately:
Select "YES" and press the controller.
{Route guidance on}.
1. {Navigation}.
2. {Route guidance off}.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
To Next Page
Loading...
Need help?
General
