On/off and settings
160
Tone settings
You can alter various tone settings, e.g. treble
and bass or the speed-dependent volume con-
trol. The tone settings are applied to all audio
sources.
The loudspeakers, rear headphones and exter-
nal audio device can be adjusted separately.
The tone settings of the headphones are
adjusted on the rear screen; the headphones
must be plugged in for this adjustment to be
possible. Only treble, bass and balance can be
adjusted.
The setting is saved for the remote control cur-
rently in use.
Altering tone settings
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "Entertain-
ment".
3. Select "Tone" and press the controller.
4. Select the desired tone setting.
Treble and bass
1. Select "Treble" or "Bass" and press the
controller.
2. Turn the controller until the desired setting
is obtained.
3. Press the controller to store the setting.
Balance and fader
1. Select "Balance" or "Fader" and press the
controller.
2. Turn the controller until the desired setting
is obtained.
3. Press the controller to store the setting.
Speed-dependent volume control
The speed-dependent volume control auto-
matically boosts the volume as the car's speed
increases. You can select various stages for the
increase in volume.
1. Select "Speed Vol." and press the control-
ler.
2. Turn the controller until the desired setting
is obtained.
3. Press the controller to store the setting.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
To Next Page
Loading...
Need help?
General
