E85 Information/Communication
- 92 -
Operation
- Initial operation
Before using for the first time, each Bluetooth mobile phone
must be coupled with the charging and hands-free unit ULF. This
coupling procedure is necessary in order to assign the mobile
phone to the ULF in the vehicle.
After coupling, this mobile phone is recognized automatically by
the ULF as soon as the handset is located in the vehicle interior.
Note
Depending on the mobile phone manufacturer, particular care
must be taken prior to initial operation to ensure that no headset
is coupled with the mobile phone. Various devices interpret the
ULF as a headset and request deactivation of the headset.
Please refer to the operating instructions of the mobile phone
for detailed information.
Coupling
The mobile phone must be within the reception range (interior).
The coupling procedure differs corresponding to the different
menu configurations of Bluetooth mobile phones. Please refer
and adhere to the valid instructions provided by the manufac-
turer.
By way of example, the following coupling operation describes
the procedure in connection with the Bluetooth mobile phone
Ericsson T39.
To Next Page
Loading...
Need help?
General
