To Next Page

To Previous Page

Hold the number-plate carrier

in position and work the cable

through opening 9.

Install screws 8 with the wash-

ers.

Close the plug, making sure

that retainer 2 engages, and

secure it to the rear frame with

cable tie 1.

with anti-theft alarm (DWA)

Push the plug of the number-

plate carrier onto the anti-theft

alarm bracket, making sure that

retainer 7 engages.

Connect the plug, making sure

that retainer 6 engages.

Position anti-theft alarm

bracket 5 in the rear frame.

109

On the race track

Questions and Answers:

Need help?

Do you have a question about the BMW HP4 and is the answer not in the manual?

BMW HP4 Specifications

General

Displacement	999 cc
Torque	112 Nm at 9, 750 rpm
Transmission	6-speed
Seat Height	820 mm
Fuel Tank Capacity	17.5 liters
Dry Weight	169 kg
Suspension	Dynamic Damping Control (DDC)
Engine Type	Water-cooled 4-cylinder 4-stroke in-line engine
Power	193 hp at 13, 000 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Aluminum swing arm
Front Brakes	Twin disc brakes
Rear Brakes	Single disc brake
Frame	Aluminum composite bridge frame
Tires	Front: 120/70 ZR 17, Rear: 200/55 ZR 17
Weight	199 kg (wet)