Seat the side panel in the rub-
ber buffer at position 4.
Install screws 3 with the wash-
ers.
Install screws 2.
Install screw 1.
Hold slipstream deflector 2 in
position, making sure that it is
the correct part for the side of
the motorcycle on which you
are working.
The letter "R" for right or "L"
for left is stamped on the back
of the slipstream deflector.
Install screws 1.
Clutch
Checking clutch function
Pull the clutch lever.
The pressure point must be
clearly perceptible.
If the pressure point is not clearly
perceptible:
Have the clutch checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking clutch-lever
play
Pull clutch lever 1 until resist-
ance is perceptible.
9
139
z
Maintenance
To Next Page
Loading...
Need help?
General
