Press the fuel tank cap down
firmly to close.
Remove the key and close the
protective cap.
Securing motorcycle
for transportation
Make sure that all components
that might come into contact
with straps used to secure the
motorcycle are adequately pro-
tected against scratching. Use
adhesive tape or soft cloths, for
example, for this purpose.
Remove screws 1 and remove
the cover panel of the bottom
fork bridge.
When being lifted on to
a stand, the vehicle can
topple and fall on its side.
Secure the vehicle to prevent
it toppling, preferably with the
assistance of a second person.
Push the motorcycle onto the
transportation flat and hold it in
position: do not place it on the
side stand.
Risk of damaging compon-
ents.
Take care not to trap
components such as brake lines
or wires.
At the front, loop a strap over
the bottom fork bridge on each
side.
5
73
z
Riding
To Next Page
Loading...
Need help?
General
