BMW HP4 User Manual

SETUP mode
Selecting a parameter
Repeatedly press button 1 or
button 2 until the parameter
you want appears on the
display.
If you pull away from rest in
this mode the electronics
switch automatically to ROAD
mode.
Each time button 1 is pressed
the possible parameters
are shown in the sequence
described below; each time
button 2 is pressed the
parameters are shown in reverse
sequence:
Rebound damping, rear (REB
DDC-RE)
Compression damping, rear
(COM DDC-RE)
Suspension damping, front
(DMP DDC-FR)
Rebound damping, front (REB
DDC-FR), only with height
sensor (Racing accessories)
Compression damping,
front (COM DDC-FR), only
with height sensor (Racing
accessories)
Calibration of height sensor
(DDC-CAL)
Engine speed for shift light ON
(SFT-ON)
Engine speed for shift light
OFF (SFTOFF)
Shift-light brightness (SFT-
BR)
Shift-light flash frequency
(SFT-FL)
Display layout in LAPTIMER
mode (SETUP LAPTIMER)
Display hold time for the most
recent time (HOLD)
Minimum lap time (LAP-TM)
Activate or deactivate indicator
for bulb defect (LAMP)
Compare current lap with best
lap (FSTLAP)
Activate or deactivate speed
warning (SPEED) in ROAD
mode
Display brightness (BRIGHT)
Exit SETUP (SETUP RE-
TURN)
6
88
z On the race track

BMW HP4 Specifications

General

Brand	BMW
Model	HP4
Category	Motorcycle
Language	English