EasyManuals Logo
Home>BMW>Motorcycle>HP4

BMW HP4 User Manual

BMW HP4
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Engine oil, capacity
SAE 5W-40, API SL /
JASO MA2, Additives (e.g.
molybdenum-based) are not
permissible because they can
attack coated components of
the engine. BMW Motorrad
recommends the use of
BMW Motorrad oils, obtainable
from your authorised
BMW Motorrad dealer.
approx. 3.5 l (with filter
change)
Engine oil, quantity for
topping up
max 0.8 l (Difference between
MIN and MAX)
If the oil level is below the MIN
mark:
Topping up the engine oil
( 132).
If the oil level is above the MAX
mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Topping up the engine oil
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Wipe the area around the oil
filler neck clean.
Remove cap 1 of the oil filler
neck.
Damage to the engine
can result if it is operated
without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Checking engine oil level
( 131).
Install oil filler cap 1.
Brake system
Checking function of
brakes
Pull the front brake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
9
132
z
Maintenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW HP4 and is the answer not in the manual?

BMW HP4 Specifications

General IconGeneral
BrandBMW
ModelHP4
CategoryMotorcycle
LanguageEnglish

Related product manuals