To Next Page

To Previous Page

Use basic stand (83 30 0 402

241) with the adapters (83 30

2 152 839).

Insert adapter pins (83 30

2 152 840) 1 into the front

suspension on left and right.

Turn brackets 2 with long ends

facing inwards.

Adjust adapters 3 to the width

of the pins inserted in the front

suspension.

Set the height of the front-

wheel stand to raise the front

wheel slightly clear of the

ground.

Engage the front-wheel stand

in the front suspension and

apply even pressure to push it

down to the ground.

151

Maintenance

Questions and Answers:

Need help?

Do you have a question about the BMW HP4 and is the answer not in the manual?

BMW HP4 Specifications

General

Displacement	999 cc
Torque	112 Nm at 9, 750 rpm
Transmission	6-speed
Seat Height	820 mm
Fuel Tank Capacity	17.5 liters
Dry Weight	169 kg
Suspension	Dynamic Damping Control (DDC)
Engine Type	Water-cooled 4-cylinder 4-stroke in-line engine
Power	193 hp at 13, 000 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Aluminum swing arm
Front Brakes	Twin disc brakes
Rear Brakes	Single disc brake
Frame	Aluminum composite bridge frame
Tires	Front: 120/70 ZR 17, Rear: 200/55 ZR 17
Weight	199 kg (wet)