Bosch Rexroth A15VSO User Manual

12/60 Safety instructions
Bosch Rexroth AG, A15VSO/A15VLO Series 11, RE 92801-01-B/11.2018
WARNING
Escaping hydraulic fluid mist!
Risk ofexplosion and fire hazard, health hazard, risk ofenvironmental pollution!
▶ Depressurize the relevant machine/system component and repair the leak.
▶ Only perform welding work when the machine/system isdepressurized.
▶ Keep open flames and ignition sources away from the axial piston unit.
▶ If axial piston units are located inthe vicinity ofignition sources orpowerful
thermal radiators, ashield must beerected toensure any escaping hydraulic
fluid cannot beignited, and toprotect hose lines from premature aging.
Electrical voltage!
Risk ofinjury from electric shock orrisk ofproperty damage!
▶ Always disconnect the voltage supply tothe relevant machine/system part
before installing the product and/or connecting ordisconnecting the connector.
Protect the machine/system against being re-energized.
Danger from unexpected machine movement!
Danger tolife orrisk ofinjury! Unintentional orcareless actuation ofthemanual
override ofthesolenoids can cause unexpected machine movements.
▶ Use the manual override only for functional testing orinthe event oftechnical
malfunctions.
▶ Using the manual override ona permanent basis (e.g.bywedging, blocking)
isnot permitted.
▶ The use ofthemanual override isonly permitted with limited technicaldata
(e.g.0.25×maximum data).
▶ Check whether ornot your machine requires additional safety measures for your
application toavoid unintentional actuation. If necessary, make sure these are
properly implemented.
▶ Wear suitable protective clothing.
Limitation oftheclosed loop control and/or open loop control function!
Risk ofinjury orproperty damage!
Under certain circumstances, moving parts incontrol equipment
(e.g.,valvespools) can get stuck due tocontamination (e.g.,impure hydraulic
fluid, abrasion orresidual dirt from components). As aresult, the hydraulic fluid
flow and the build-up oftorque inthe axial piston unit can nolonger respond
correctly tothe operator’s specifications. Even the use ofvarious filter elements
(externalorinternal flow filtration) will not rule out afault but merely reduce
therisk.
▶ Check whether your application requires remedial measures onyour machine
inorder tobring the driven consumer toasafe position (e.g.safe stop).
▶ If necessary, make sure these are properly implemented.

Bosch Rexroth A15VSO Specifications

General

Brand	Bosch
Model	Rexroth A15VSO
Category	Water Pump
Language	English