Contents 3/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
1 About this documentation 5
1.1 Validity ofthedocumentation 5
1.2 Required and supplementary documentation 5
1.3 Representation ofinformation 6
1.3.1 Safety instructions 6
1.3.2 Symbols 6
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 9
2.5 General safety instructions 10
2.6 Product-specific safety instructions 11
2.7 Personal protective equipment 13
3 General instructions onproperty damage and product damage 14
4 Scope ofdelivery 17
5 About this product 18
5.1 Performance description 18
5.2 Product description 18
5.2.1 Axial piston unit layout 18
5.2.2 Functional description 19
5.3 Product identification 20
6 Transport and storage 21
6.1 Transporting the axial piston unit 21
6.1.1 Transport byhand 21
6.1.2 Transport with lifting devices 21
6.2 Storing the axial piston unit 24
7 Installation 26
7.1 Unpacking 26
7.2 Installation conditions 26
7.3 Installation position 28
7.3.1 Below-reservoir installation (standard) 28
7.3.2 Inside-reservoir installation 29
7.3.3 Above-reservoir installation 30
7.4 Installing the axial piston unit 31
7.4.1 Preparation 31
7.4.2 Dimensions 31
7.4.3 General instructions 32
7.4.4 Installation with acoupling 32
7.4.5 Installation on a gearbox 33
7.4.6 Installation with cardan shaft 34
7.4.7 Completion of assembly 34
Contents