Transport and storage 21/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
6 Transport and storage
▶ Always observe the necessary ambient conditions for transport and storage;
seechapter 6.2 "Storing the axial piston unit" onpage 24.
Information onunpacking can befound inchapter 7.1 "Unpacking" onpage 26.
6.1 Transporting the axial piston unit
The following transportation options are available depending onweight and duration
oftransport:
• Transporting byhand (chapter not relevant for this axial piston unit)
• Transporting with alifting device (eye bolt orlifting strap)
Table 6: Dimensions and weights (without through drive) A15VSO
Size 110 145 175 210 280
Weight kg 64 79 97 111 143
Width mm Dimensions vary byequipment. The values applicable for your axial piston
unit can befound inthe installation drawing (request ifnecessary).
Height mm
Depth mm
Weight may vary byequipment.
Table 7: Dimensions and weights (without through drive) A15VLO
Size 145 175 210 280
Weight kg 92 110 125 148
Width mm Dimensions vary byequipment. The values applicable for your axial piston
unit can befound inthe installation drawing (request ifnecessary).
Height mm
Depth mm
Weight may vary byequipment.
6.1.1 Transport byhand
Axial piston units with aweight ofup to15kg can betransported byhand for ashort
time, ifnecessary.
CAUTION! Risk ofinjury due toheavy loads!
Health hazard from carrying axial piston units.
▶ Always use appropriate lifting, lowering and moving techniques.
▶ Use your personal protective equipment (e.g.safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶ Do not transport the axial piston unit bysensitive assembled parts (e.g.sensors
orvalves).
▶ Carefully place the axial piston unit onthe seating toprevent itfrom being
damaged.
6.1.2 Transport with lifting devices
For transporting, the axial piston unit can beconnected toalifting device via aneye
bolt inthe drive shaft orinthe housing. Alternatively, itcan also betransported with
alifting strap.
Dimensions and weights