Bosch Rexroth A15VSO User Manual

Transport and storage 25/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
An uninstalled axial piston unit must bepreserved with corrosion protection for the
duration ofstorage.
The following instructions only refer toaxial piston units operated with hydraulic
fluid on amineral oil basis. Other hydraulic fluids require other specific
preservation measures. In such acase, consult your local contact person; you can
find their contact information at
www.boschrexroth.com/addresses
BoschRexroth recommends the following procedure:
1. Clean the axial piston unit; seechapter10.1 "Cleaning and care" onpage47.
2. Drain the axial piston unit.
3. For storage times up to12 months: Moisten the inside oftheaxial piston unit
with mineral oil and fill with approx. 100 ml mineral oil.
For storage times up to24months: Fill the axial piston unit with VCI329
corrosion protection (20ml).
The filling iscarried out via the drain port T
1
, T
2
orT
3
, seechapter7.4 "Installing
the axial piston unit", Fig. 14 toFig. 16 onpage38.
4. Plug all ports sothey are airproof.
5. Coat unpainted areas oftheaxial piston unit with mineral oil orsuitable, easily
removable corrosion protection, e.g.acid-free grease.
6. Package the axial piston unit with desiccant incorrosion protection film soit
isairproof.
7. Store the axial piston unit inashock-proof manner; see "Requirement"
onpage24 inthis chapter.
After removal

Bosch Rexroth A15VSO Specifications

General

Brand	Bosch
Model	Rexroth A15VSO
Category	Water Pump
Language	English