Bosch Rexroth A15VSO User Manual

Installation 35/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
5
3
4
4
1
2
or
X (LRDRS0)
Fig. 13: Removing transport protection
1 Protective cover
2 Threaded plugs
3 Protective plug
4 Steel flange covers (the flange cover
onthe suction port provides asecure
stand and protection for the V
g max
stop)
5 For version with through drive,
protective cover and mounting
bolts
Ports intended for connecting lines come with protective plugs orthreaded plugs,
which serve astransport protection. Connect all ports required for functional
operation (see Table 12 "Ports A15VSO/A15VLO series 11" onpage39). Failure
todo socould lead tomalfunctions ordamage. If aport isnot being used, it is to
bepluggedwith athreaded plug since the protective plugs are not pressure-resistant.
Important for LRDRS0 controllers! Port X isequipped with aprotective plug (3).
This port must beconnected. Failure todo socould lead tomalfunctions
ordamage.
You will find other ports for the respective control inthe datasheet92801.
Setting screws are protected against unauthorized adjustment bytamper-proof
caps. Removal ofthetamper-proof caps will void the warranty. If you need
tochange the settings, please contact your local contact person; you can find
their contact information at
www.boschrexroth.com/addresses

Bosch Rexroth A15VSO Specifications

General

Brand	Bosch
Model	Rexroth A15VSO
Category	Water Pump
Language	English