Bosch Solution 2000 Quick Reference Guide

3. Press the [*] key to delete the RF Repeater.
Example:
To delete existing RF Repeater 8: Enter your installer code and press [0] [#] [8] [2] [9] [#] [*].
Add/Delete RF Keyfob
Add WE800EV2 Keyfob
Notice!
Learn all WE800EV2 keyfobs via WE800EV2 receiver Learn/Delete button before adding the
WE800EV2 keyfobs to the system. Refer WE800EV2 manual for learn/delete fobs.
Set RF receiver as WE800EV2 Receiver.
1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
2. Enter the WE800EV2 keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 21 WE800EV2 keyfobs can be added, but
only current keyfob number (1 to 16 ) displays through zone indicators on the ICON
codepad.
3. Only use auto-learn mode to configure keyfob RFID. Press [*] key to switch into auto-
learn mode. When icon numbers (1 to 16) flash, press button 1 or 2 of the keyfob. The
panel learns the WE800EV2 Keyfob ID number and the last digit of RFID number displays
on the codepad. Press [#] key to confirm.
4. Enter [#] key to confirm the operation, or press [*] to cancel.
Delete WE800EV2 Keyfob
1. Enter the Installer Code, followed by [0] and the [#] key.
2. Enter the WE800EV2 keyfob number (301 to 332) you want to delete, followed by the [#]
key.
3. Press the [*] key to delete the WE800EV2 Keyfob.
Add RADION Keyfob
Set RF receiver as RADION Receiver.
1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
2. Enter the RADION keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 32 RADION keyfobs can be added, but only
current keyfob number (1 to 16 ) displays through zone indicators on the ICON codepad.
3. Use manual mode or auto-learn mode to configure RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number, followed by the [#] key.
– Or press [*] key to switch into auto-learn mode. When icon numbers (1 to 16) flash,
press button 1 or 2 of the keyfob. The panel learns the RADION Keyfob ID number
and the last digit of RFID number displays on the codepad. Press [#] key to confirm.
4. Enter [#] key to confirm the operation, or press [*] to cancel.
Delete RADION Keyfob
1. Enter the Installer Code, followed by [0] and the [#] key.
2. Enter the RADION keyfob number (301 to 332) you want to delete, followed by the [#]
key.
3. Press the [*] key to delete the RADION Keyfob.
Example:
To delete existing RADION keyfob 1: Enter your installer code and press [0] [#] [3] [0] [1] [#]
[*].
3.3
Control Panel Operating Commands | en 15
Bosch Security Systems, Inc. Quick Reference Guide 2015.06 | 03 | F.01U.298.027

Bosch Solution 2000 Specifications

General

Brand	Bosch
Model	Solution 2000
Category	Control Panel
Language	English