Bosch Solution 2000 Quick Reference Guide

Table of contents
1
Introduction 6
2
Programming 7
2.1 TEXT LCD Codepad Menu Programming 7
2.2 ICON LCD Codepad Programming 10
2.3 Programming Option Bits 11
2.4 Installer's programming commands 11
3
Operating Commands 12
3.1 Add/Delete RF Device (Wireless Zones) 14
3.2 Add/Delete RF Repeater 14
3.3 Add/Delete RF Keyfob 15
3.4 Set the Number of Days until the First Test Report 16
3.5 Change Domestic Telephone Numbers 16
3.6 Change the Telco Arm/Disarm Sequence 16
3.7 Set STAY Mode 2 Bypass Zones 16
3.8 Report Monitor Mode (Toggle On/Off) 16
3.9 Walk Test Mode 17
3.10 Event Memory Recall 17
3.11 Fault Analysis Mode 17
4
Programming Parameters 20
4.1 Communication Programming 20
4.1.1 Receiver 1 20
4.1.2 Receiver 2 20
4.1.3 External Network Module 22
4.1.4 Password for A-Link Plus/RSC Connection 23
4.1.5 DTMF Timing Compensation 23
4.1.6 Country Codes 23
4.1.7 Telco Arming Sequence (Call Forward On) 23
4.1.8 Telco Disarm Sequence (Call Forward Off) 23
4.1.9 Call Back Telephone Number 23
4.1.10 Ring Count 23
4.1.11 Telephone Line Fail Options 24
4.1.12 Communication Options 1 24
4.1.13 Communication Options 2 24
4.1.14 Communication Options 3 24
4.1.15 A-Link Plus Options 25
4.2 Installer Code 25
4.3 User Code Programming 25
4.4 Day Alarm Zones 27
4.5 EOL Resistor Value 27
4.6 Zone Programming 27
4.7 Swinger Programming 30
4.7.1 Swinger Shutdown Count For Siren 30
4.7.2 Swinger Shutdown Count For Report 31
4.8 Zone Status Programming 31
4.8.1 STAY Mode 2 Automatically Bypass Zones 31
4.8.2 Zone Status Reporting Options 31
4.9 RF Programming 31
Control Panel Table of Contents | en 3
Bosch Security Systems, Inc. Quick Reference Guide 2015.06 | 03 | F.01U.298.027

Bosch Solution 2000 Specifications

General

Brand	Bosch
Model	Solution 2000
Category	Control Panel
Language	English