_____________________________________________________________________________________________________
Printing Labels 41
♦♦ Printing Labels
4.0 Introduction
This chapter explains how to generate labels using several different methods,
and how to print different bar codes. An optional Internal Batch Cartridge is
available for generating label formats using the Printer as a stand-alone device.
A VT 100 or LINK MCII compatible CRT is required if the optional Internal
Batch Cartridge is used to generate labels. The Internal Batch Cartridge
Program works much like a PC compatible software package, but uses internal
batch modules instead of a hard or floppy disk drive to store and retrieve label
formats.
Labels can also be generated using RS-232 to a host computer or by using a PC
with a compatible labeling software package. This chapter explains some of the
basic programming commands that are required when writing programs to
generate label formats.
NOTE: The programming information contained in this manual is for
reference purposes only. Refer to the Programmer's Manual for
detailed descriptions and programming formats.
To Next Page
Loading...
Need help?
General
