_____________________________________________________________________________________________________
50 Printing Labels
4.4 Printing Lines and Boxes
Lines and boxes can be created by requesting font “X”. The horizontal and
vertical multipliers, and row/column position work with the line and box
routines in the same manner as human-readable fonts. The format of the data
area is as follows:
LINES: Lhhhvvv
L = “L” specifies line drawing
hhh = horizontal width of line
vvv = vertical height of line
LINES: lhhhhvvvv
1 = “1” specifies line drawing
hhhh = horizontal width of line
vvvv = vertical height of line
BOXES: Bhhhvvvbbbsss
B = “B” specifies box drawing
hhh = horizontal width of box
vvv = vertical height of box
bbb = thickness of bottom and top box edges
sss = thickness of sides of box
BOXES: bhhhhvvvvbbbbssss
b = “b” specifies box drawing
hhhh = horizontal width of box
vvvv = vertical height of box
bbbb = thickness of bottom and top box edges
ssss = thickness of sides of box
To Next Page
Loading...
Need help?
General
