Bruker InsightMR User Manual

Flow Tube Assembly - Removal Checklist
48 H155936_3_003
9.3 Storage
1. Close the inlet of the sample line to protect it against dust and dirt.
2. Leave the glass flow tube connected to the tube holder and insert it into the flow tube
protector to protect it against damage.
3. Coil up the transfer line and place the system into the original transport box.
9.4 Prepare the NMR System
1. Activate the sample changer.
2. Set the temperature of the NMR probe and the gas flow back to normal values.
3. Remove the transfer line holder from the Bruker Sample Transport (note the transfer line
holder cannot be used with a SampleJet).
4. Define the sample changer in InsightMR/IconNMR configuration.
5. Select the desired user in InsightMR/IconNMR part.
6. Optional: press the Unhook button to disconnect IconNMR from InsightMR software.
9.5 The system is ready for normal usage

Bruker InsightMR Specifications

General

Brand	Bruker
Model	InsightMR
Category	Analytical Instruments
Language	English