Introduction
8 H155936_3_003
2.3 Limitation of Liability
All specifications and instructions in this manual have been compiled taking account of
applicable standards and regulations, the current state of technology and the experience and
insights we have gained over the years.
The manufacturer accepts no liability for damage due to:
• Failure to observe this manual.
• Improper use.
• Deployment of untrained personnel.
• Unauthorized modifications.
• Technical modifications.
• Use of unauthorized spare parts.
The actual scope of supply may differ from the explanations and depictions in this manual in
the case of special designs, take-up of additional ordering options, or as a result of the latest
technical modifications.
The undertakings agreed in the supply contract, as well as the manufacturer's Terms and
Conditions and Terms of Delivery, and the legal regulations applicable at the time of the
conclusion of the contract shall apply.
2.4 Copyright
All rights reserved. This manual is protected by copyright and intended solely for internal use
by customers.
This manual must not be made available to third parties, duplicated in any manner or form –
whether in whole or in part – and the content must not be used and/or communicated, except
for internal purposes, without the written consent of the manufacturer.
Product names used are trademarks
TM
or registered trademarks
®
of their respective holders.
Violation of the copyright will result in legal action for damages. We reserve the right to assert
further claims.
2.5 Warranty Terms
The warranty terms are included in the manufacturer's Terms and Conditions.
2.6 Customer Service
Our customer service division is available to provide technical information. See the chapter
Contact for contact information.
In addition, our employees are always interested in acquiring new information and experience
gained from practical application; such information and experience may help improve our
products.
To Next Page
Loading...
Need help?
General