CAME RBM84-HW User Manual

F - 11
F
-
12
OFF
ON
F
-
10
+
Esc
F - 12
F
-
13
1
3
2
60
F
-
11
+
Esc
RBM84 - Hardware and connections
10
Page
10
10 - Manual code:
FA00189M04
FA00189M04 ver.
1
10/2015 © CAME s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice by CAME S.p.a.
Function 11: Stand Alone or OnLine mode
In Stand-Alone (OFF) the turnstile works automatically, while On-Line (ON) the turnstile is connected and controlled by RBM84.
Function 12: Device number.
Assign the position inside the RBM84 circuit to each turnstile.
The turnstile must be confi gured and numbered via functions 11 and 12 in order to perform operations in the RBM84
system, as shown hereafter.
(for 10 cycles)
(for 11 cycles)
RBM84 Turnstile confi guration

CAME RBM84-HW Specifications

General

Brand	CAME
Model	RBM84-HW
Category	Control Systems
Language	English