100
a: Fully Automatic Wireless Flash Photography
Since the following functions set on the master unit will be set
automatically to the slave units on this wireless system, you do not
need to operate the slave unit(s). For this reason, you can perform
wireless flash photography in the same way as normal flash
photography.
You can designate two or more master units. By preparing multiple
cameras with master units attached, you can change cameras while
keeping the same lighting (slave units) during wireless flash
photography.
Advanced Shooting with Fully Automatic Wireless Flash
• Flash exposure compensation
(f/p.28)
• High-speed sync
(c/p.31)
•FEB (g/p.29) • Manual flash (p.40, 105)
•FE lock (p.30) • Stroboscopic flash (p.42)
Master Units
The flash frequency when performing stroboscopic flash during optical
transmission wireless shooting can be set from 1 Hz to 199 Hz (settings
from 250 Hz to 500 Hz are not available).
You can also directly operate the slave unit to individually set flash exposure
compensation and flash coverage on each slave unit.
To Next Page
Loading...
Need help?
General
