93
Wireless Settings
To avoid interference with optical transmission wireless flash systems
used by other photographers, you can change the transmission
channel. Set the same channel for both the master unit and slave
unit.
1
Display <C>.
On the master unit, press function
button 4 to display <O>.
On the slave unit, press function
button 4 to display <N>.
2
Set a transmission channel.
Press function button 1 <C>.
Turn <9> to select any channel
between Ch.1 to 4, then press <8>.
Transmission Channel Setting
If the transmission channels of the master unit and slave unit are different,
the slave unit will not fire. Set both to the same number.
To Next Page
Loading...
Need help?
General
