82
In radio transmission wireless shooting, you can fire the test flash and
modeling flash (p.47) from a 600EX II-RT set as a slave unit.
1
Display <N>.
Press the slave unit’s function button
4 to display <N>.
2
Fire the flash.
[Test flash firing]
Press the slave unit’s function button
3 <Z>.
[Modeling flash] (p.47)
Press the slave unit’s function button
2 <>>.
X A flash signal is sent from the slave
unit to the master unit, and a wireless
system test flash or modeling flash is
fired.
Test Flash and Modeling Flash from a Slave Unit
Modeling flash is not possible from a slave unit with cameras released up
to 2011 or with EOS REBEL T6/1300D or EOS REBEL T5/1200D.
For the precautions related to modeling flash, see page 47.
When C.Fn-02-1 is set on the master unit
(p.113)
, modeling flash will not
be fired even if you select <
M
>.
When there are two or more master units (p.72), the flash signal is sent to
the main master that has the <D> lamp lit in green.
To Next Page
Loading...
Need help?
General
