46
//.: Flash External MeteringN
You can manually set the Speedlite with the ISO speed and aperture set
on the camera. The flash output is automatically adjusted according to
the ISO speed and aperture that you set.
1
Set the flash mode to <.>.
Press the <E> button.
Turn <9> to select <s>, then
press <8>.
2
Set the same ISO speed as on the
camera.
Press function button 3 <I>.
X The ISO speed value is highlighted.
Turn <9> to set the ISO speed, then
press <8>.
ISO speed can be set within a range of
ISO 25 to ISO 51200, in 1/3 increments.
3
Set the same aperture as on the
camera.
Press function button 4 <D>.
X The aperture is highlighted.
Turn <9> to set the aperture value,
then press <8>.
The effective flash range
corresponding to the preset ISO
speed and aperture value is displayed.
.: Manual External Flash Metering
ISO speed
Aperture
When shooting with <.> set and the camera and Speedlite’s PC
terminals connected by a commercially-available sync cord, you can
shoot without attaching the flash to the camera.
Even if you connect a different Speedlite to the Speedlite’s PC terminal
with a sync cord, it will not fire.
If <s> is not displayed in step 1, set the flash Custom Function to
C.Fn-05-3 (p.114).
To Next Page
Loading...
Need help?
General
