33
By pointing the flash head toward a ceiling or wall, the flash light will
bounce off the surface before illuminating the subject, making it
possible to soften the shadows of the subject for a more natural-looking
shot. This shooting method is called “Bounce flash photography”.
Set the Bounce Direction
You can turn the flash head while pressing the <z> button as
shown. When you turn the flash head, the display changes to <m>.
When the flash head is turned with the flash coverage set to <L>
(automatic), the flash coverage is set at 50 mm and <
---> is
displayed.
You can also set the flash coverage manually (p.38).
m
Bounce
To Next Page
Need help?
General
