125
f Flash Firing Restriction due to Temperature Increase
The following table shows the number of continuous flashes until the
warning (level 1) is displayed, and the necessary rest time (guideline)
until normal flash photography can be performed.
Number of Continuous Flashes and Rest Time
Function
Number of Continuous Flashes to
Reach Level 1 Warning (Guideline)
Necessary
Interval
Time
(Guideline)
Flash Coverage
14mm 20mm 24mm 28mm
35mm
or more
Continuous full
output flash (p.17)
60 times
or more
65 times
or more
70 times
or more
85 times
or more
100 times
or more
40 min.
or longer
Modeling flash (p.
47
)
40 times
or more
40 times
or more
40 times
or more
50 times
or more
60 times
or more
Stroboscopic flash
(p.42)
Varies depending on firing conditions
CAUTION
When performing continuous flash, do not touch the flash head,
batteries, or the area near the battery compartment.
When continuous flash or modeling flash is repeatedly fired at short intervals,
do not touch the flash head, batteries, or the area near the battery
compartment. The flash head, batteries, and area near the battery
compartment may become hot, resulting in the risk of burn.
To Next Page
Loading...
Need help?
General
