TROUBLE, CAUSE & REMEDY
IT CANNOT BE RELEASED.
1 The blades do not move.
2 The main cocking lever
does not move.
3 Inferior Piston Move
4 An obstacle be caught in.
HEAVY RELEASE
1 Roughness of Release Hook
and Main Cocking Lever
2 Inferior Operation of
1-1 Oil
Clean.
1-2 Metal collapse
Replacement
Refer to the item of shutter blades adjustment.
2-1 Creaking main cocking lever shaft
Replacement
Refer to the item of main cocking lever
adjustment.
2-2 Rusting main cocking lever
Replacement
the same as the above
3-1 Coming off piston spring
Correct the hanging.
Check the spring movement.
3-2 Adjusting aberration
Refer to the item of main cocking lever
adjustment.
3-3 The piston does not move.
Replacement
the same as the above
Abridged
1-1 Lack of oil on the touching surface
Lubricate MOG-3 on the surface.
1-2 Roughness of the touching surface
Replacement
Refer to the item of release lever and main
cocking lever adjustment.
2-1 Bent release lever
Adjustment
Check the gearing of rear release and tension.
18
To Next Page
Loading...
Need help?
General
