Canon Canonet 1 User Manual

3 Transformation by Shock
4 Detached Spring
DIAPHRAGM BLADES DO
NOT RETURN SMOOTHLY.
1 Oil
2 Inferior Operation of
Auto Diaphragm Lever
3 Inferior Operation of
Manual Diaphragm Lever
B FULL OPEN
1 Inferior Governor
2 Connection of B Lever and
Main Cocking Lever
2 At this time check if the
auto lever moves smoothly
without any catching.
2-2 Warping
Replacement
Refer to the item of diaphragm blades
adjustment.
2-3 Scratch
Replacement
the same as the above
Refer to the item of diaphragm blades adjustment.
Hang it up.
3 Creaking Sector Rine
2-1 Loosened screw
abridged
2-2 It touches to the case because of bending.
Replace the auto lever.
2-3 Rusted
the same as the above
3-1 Lubricate and clean.
3-2 Replace in case of inferior revetting.
3-3 Replace in case of rusting.
Refer to slow skipping.
2-1 Stuck
Replace B lever.
2-2 Rough surface
Replace B lever and main cocking lever.
Refer to the item of main cocking lever.
Most of this trouble being caused by shock.
21

Canon Canonet 1 Specifications

General

Brand	Canon
Model	Canonet 1
Category	Film Camera
Language	English