Canon iR1018 Series User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
3-41
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
Setting Up a Computer as a File Server
To send data from the machine to a computer on your
network, you need to specify the settings of the computer
for receiving data. You can send data over a NetBIOS
network to a Windows shared folder. This section describes
how to configure a shared folder.
NOTE
The following procedures describe a sample shared folder
configuration. Depending on your environment, the actual configuration
procedure may differ.
■ Connecting to a TCP/IP Network
A computer that receives data sent from the machine must have
TCP/IP client software installed and must be enabled for TCP/IP
network use. For details, see the documentation provided with
the operating system.
■ Connecting to a NetBIOS Network and
Configuring a Shared Folder
Windows 98/Me
NOTE
– If a suitable Windows 2000/XP/Server 2003 machine is available on
your network, it is recommended that you configure that machine as
a file server instead of using a Windows 98/Me machine.
– In the following procedures, items displayed on the screen for
Windows 98 are used; items might differ depending on your
operating system.

Canon iR1018 Series Specifications

General

Print Technology	Laser
Max Paper Size	A4
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Output	100 sheets
Copy Resolution	600 x 600 dpi
Network Ready	No
Scanner	Yes
Copier	Yes
Printer	Yes
Fax	No
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Paper Input (Standard)	250 sheets
Paper Sizes	A4, A5, B5
Copy Speed	18 cpm
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Scan to	PC
First Copy Time	Less than 10 seconds